|
|
Saturno Jet, ideale per bagni moderni PAGE UNDER CONSTRUCTION
|
|
Model Saturno Jet S (code J7100) with jet opening push-button Water handgrip with incorporated ceramic faucet and steerable support, technical flex tube in stainless steel braid. The Arvag hydrobrushes are manufactured with the exclusive technology Dynamic Jet Nozzle, which gives a fine and strong water jet at “laser effect” either above or below the water-level of the W.C.
|
|
Modello Saturno Jet 20" (cod. J7020)PAGE UNDER CONSTRUCTION
|
|
Modello Saturno Jet Ruota (cod. J7030)PAGE UNDER CONSTRUCTION
|
|
Modello Saturno Jet Automatic ( cod. 7040)PAGE UNDER CONSTRUCTION
|
|
Model Saturno Jet BE (code J7500) with jet opening push-button For already furnished bathrooms: the connection will be made through the special complimentary adapter, complete of close valve, at the cold water point of the nearest WC sanitary (for example, the bidet).
|
|
Installation in new bathrooms (Saturno BN – BN2 – S – S/C) Fix up a water point at approx 50 cm. from the floor beside the WC (for model BN2 the water point could be also in other position).
Drawn:
A = approx 40 cm.
B = approx 50cm.
|
|
Installation in already furnished bathrooms (Saturno BE) The special T connection with safety valve to be tied up at the cold water point of the bidet as shown in the picture hereafter.
|
|
|
Hygienic Shower grip All a.m. models are available also with Soft nozzle, which gives a soft jet. Therefore they can be used as hygienic handgrip for bidet use; in this case the connection has to foresee mixed water flow. The different models are identified as Saturno Soft instead of Saturno Jet, followed by the same code with “S” instead “J”. (example: Saturno Jet/S code J7100 corresponds to the hydrobrush, Saturno Soft/S code S7100 corresponds to the hygienic handgrip).
|
